127410, Российская Федерация, Москва, Алтуфьевское ш., д.41А, email: info@expertnk.ru
+7(495) 660 94 49 (многоканальный номер)
8 (800) 250 94 49 (бесплатный для регионов)
+7(495) 660 94 49 (многоканальный номер)
8 (800) 250 94 49 (бесплатный для регионов)
- Certification Of Specialists
- Laboratory Accreditation
- NDT Devices & Means
- Calibration Of NDT Funds
Requirements for a specialist
Appendix 3
to the Rules for certification of personnel in the field of non-destructive testing,
approved by the Resolution of the Gosgortekhnadzor of Russia of 23.01.2002 N 3
Requirements for special training and work experience
Table 1 Appendix 3
Requirements for the minimum terms of special training for admission to the qualifying examination and certification at I and II levels of qualification
| Type (method) of NDT | Level I (hours) | Level II (hours) |
|---|---|---|
| ultrasonic UK | 40 | 80 |
| acoustic - emission AE | 40 | 80 |
| radiation (RK) | 40 | 80 |
| magnetic MK | 40 | 80 |
| eddy current VT | 40 | 80 |
| penetrating substances: | ||
| capillary PVK | 24 | 40 |
| leak detection PVT | 40 | 80 |
| visual and measuring VIK | 24 | 40 |
| vibrodiagnostic VD | 40 | 80 |
| electric EK | 24 | 40 |
| thermal TK | 40 | 80 |
| optical OK | 24 | 24 |
| other methods | in accordance with approved programs | |
| Note 1: training includes practical and theoretical courses. Note 2: in accordance with Russian legislation, the equivalent of a working week is 40 hours. Note 3: admission to certification at level II is carried out after completing training in the amount of total time for levels I and II. Note 4: Preparation time can be reduced by up to 50% for candidates skilled in a limited area (eg ultrasonic inspection of polyethylene pipes) or inspection method (eg ultrasonic thickness measurement). Note 5: Decreases in the total training time required may be permitted by the Independent Body for applicants with a higher technical or university education. | ||
Table 2 Appendix 3
Minimum production experience requirements for admission to the qualification exam and certification for levels I and II
| Type (method) of NDT | Production experience, months (at 40 hour week) | ||
|---|---|---|---|
| level I | level II | ||
| For a specialist, tier-1 | For a specialist who does not have a level I | ||
| UK | 6 | 12 | 18 |
| AE | 6 | 12 | 18 |
| RK | 6 | 12 | 18 |
| MK | 3 | 9 | 12 |
| VT | 3 | 9 | 12 |
| PVK | 3 | 6 | 9 |
| PVT | 3 | 9 | 12 |
| VIK | 3 | 6 | 9 |
| VD | 6 | 12 | 18 |
| EK | 3 | 6 | 9 |
| TK | 6 | 12 | 18 |
| other methods | 3 | 6 | 9 |
| Note 1: Work experience in months is estimated at a nominal 40 hour week or statutory work week. When a professional works more than 40 hours a week, then all hours worked by him can be taken into account, but he is required to provide confirmation of this experience. Note 2: The duration of the required experience can be reduced by 50% if the specialist is certified in a limited area. Note 3: production experience can be acquired simultaneously using two or more NDT methods, while the total required experience can be reduced as follows: - two NDT methods - reducing the total total experience by 25%; - three NDT methods - reduction of total experience by 33%; - four or more NDT methods - reducing the total duration of production experience up to 50%; in all cases, for each method, the candidate must have at least 50% of the experience required by Table 3. Note 4: up to 50% of experience can be gained in practical classes, the duration can be taken into account with a factor of no more than five (5). Practical exercises should include the control of full-scale objects or objects close to them. | |||
